You are here:

All Dielectric Self-supporting Aerial Cable(ADSS)

Single Jacket Picture

Double Jacket Picture

ADSS cable is loose tube stranded. Fibers,are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with HDPE , LSZH or  AT outer sheath.


1,The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. 

2,For overhead power lines under 110kV, PE outer sheath is applied. 

3,For power lines equal to or over 110kV, AT outer sheath is applied. 

4,The dedicate design of aramid quantity and stranding process can satisfy the  demand on various spans.


1,Can be installed without shutting off the power

2,Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops

3,Large span lengths and the largest span is over 1000m

4,Good performance of tensile strength and temperature


If you have any questions or need more info , please leave your message .